• 嵌入式培訓

    嵌入式Linux就業班馬上開課了 詳情點擊這兒

    集成電路設計中心企業

     
    上海報名熱線:021-51875830
    北京報名熱線:010-51292078
    深圳報名熱線:4008699035
    南京報名熱線:4008699035
    武漢報名熱線:027-50767718
    成都報名熱線:4008699035
    廣州報名熱線:
    4008699035
    西安報名熱線:029-86699670
    曙海研發與生產請參見網址:
    www.shanghai66.cn
    全英文授課課程(Training in English)
      首 頁  手機閱讀模式  課程介紹   培訓報名  企業培訓   付款方式   講師介紹   學員評價  關于我們   聯系我們   承接項目 開發板商城 
    嵌入式協處理器--FPGA
    FPGA項目實戰系列課程----
    嵌入式OS--4G手機操作系統
    嵌入式協處理器--DSP
    手機/網絡/動漫游戲開發
    嵌入式OS-Linux
    嵌入式CPU--ARM
    嵌入式OS--WinCE
    單片機培訓
    嵌入式硬件設計
    Altium Designer Layout高速硬件設計
    嵌入式OS--VxWorks
    PowerPC嵌入式系統/編譯器優化
    PLC編程/變頻器/數控/人機界面 
    開發語言/數據庫/軟硬件測試
    3G手機軟件測試、硬件測試
    芯片設計/大規模集成電路VLSI
    云計算、物聯網
    開源操作系統Tiny OS開發
    小型機系統管理
    其他類
    WEB在線客服
    南京WEB在線客服
    武漢WEB在線客服
    西安WEB在線客服
    廣州WEB在線客服
    點擊這里給我發消息  
    QQ客服一
    點擊這里給我發消息  
    QQ客服二
    點擊這里給我發消息
    QQ客服三
    公益培訓通知與資料下載
    企業招聘與人才推薦(免費)

    合作企業新人才需求公告

    ◆招人、應聘、人才合作,
    請把需求發到officeoffice@126.com或
    訪問曙海旗下網站---
    電子人才網
    www.morning-sea.com.cn
    合作伙伴與授權機構
    現代化的多媒體教室
    曙海招聘啟示
    郵件列表
     
     
      RTL Synthesis(Design Synthesis)培訓
       班級規模及環境--熱線:4008699035 手機:15921673576/13918613812( 微信同號)
           堅持小班授課,為保證培訓效果,增加互動環節,每期人數限3到5人。
       上課時間和地點
    上課地點:【上!浚和瑵髮W(滬西)/新城金郡商務樓(11號線白銀路站) 【深圳分部】:電影大廈(地鐵一號線大劇院站)/深圳大學成教院 【北京分部】:北京中山/福鑫大樓 【南京分部】:金港大廈(和燕路) 【武漢分部】:佳源大廈(高新二路) 【成都分部】:領館區1號(中和大道) 【沈陽分部】:沈陽理工大學/六宅臻品 【鄭州分部】:鄭州大學/錦華大廈 【石家莊分部】:河北科技大學/瑞景大廈 【廣州分部】:廣糧大廈 【西安分部】:協同大廈
    近開課時間(周末班/連續班/晚班)
    RTL Synthesis(Design Synthesis)培訓:2022年10月1日.(歡迎您垂詢,視教育質量為生命!)
       實驗設備
         ☆資深工程師授課

            
            ☆注重質量
            ☆邊講邊練

            ☆合格學員免費推薦工作

            ☆合格學員免費頒發相關工程師等資格證書,提升您的職業資質

            專注高端培訓17年,曙海提供的課程得到本行業的廣泛認可,學員的能力
            得到大家的認同,受到用人單位的廣泛贊譽。

            ★實驗設備請點擊這兒查看★
       新優惠
           ◆在讀學生憑學生證,可優惠500元。
       質量保障

            1、培訓過程中,如有部分內容理解不透或消化不好,可免費在以后培訓班中重聽;
            2、培訓結束后免費提供半年的技術支持,充分保證培訓后出效果;
            3、培訓合格學員可享受免費推薦就業機會。

      RTL Synthesis(Design Synthesis)培訓
    培訓方式以講課和實驗穿插進行

    課程描述:

    第一階段 Design Compiler 1

    Overview
    This course covers the ASIC synthesis flow using Design Compiler Topographical / Graphical -- from reading in an RTL design (Verilog, SystemVerilog and VHDL) to generating a final gate-level netlist. You will learn how to read in your design file(s), specify your libraries and physical data, constrain a complex design for timing and floorplan, apply synthesis techniques using Ultra, compile to achieve timing closure and an acceptable congestion, analyze the synthesis results for timing and congestion, and generate output data that works with downstream layout tools.

    You will verify the logic equivalence of synthesis transformations (such as Datapath optimizations and Register Retiming) to that of an RTL design using Formality. The course includes labs to reinforce and practice key topics discussed in lecture. All the covered commands and flows are printed separately in a 5-page Job Aid, which you can refer to back at work.

    Objectives
    At the end of this workshop the student should be able to:
    • Create a setup file to specify the libraries and physical data
    • Read in a hierarchical design
    • Constrain a complex design for timing, taking into account different environmental attributes such as output loading, input drive strength, process, voltage and temperature variations, as well as post-layout effects such as clock skew
    • Constrain multiple (generated) clocks considering Signal integrity analysis
    • Execute the recommended synthesis techniques to achieve timing closure
    • Analyze and Improve global route congestion
    • Perform test-ready synthesis
    • Verify the logic equivalence of a synthesized netlist compared to an RTL design
    • Write DC-Tcl scripts to constrain designs, and run synthesis
    • Generate and interpret timing, constraint, and other debugging reports
    • Understand the effect that RTL coding style can have on synthesis results
    • Generate output data (netlist, constraints, scan-def) that works with downstream physical design or layout tools

    Course Outline

    Unit 1
    • Introduction to Synthesis
    • Design and Technology Data
    • Design and Library Objects
    • Timing Constraints

    Unit 2
    • Environmental Attributes
    • Synthesis Optimization Techniques
    • Timing Analysis

    Unit 3
    • Additional Constraint Options
    • Multiple Clocks and Timing Exceptions
    • Congestion Analysis and Optimization
    • Post-Synthesis Output Data
    • Conclusion



    第二階段 Design Compiler 2: Low Power

    Overview
    At the end of this one day, seminar based, workshop you will understand how to apply both traditional and UPF based power optimization techniques during RTL synthesis and scan insertion:

    For single voltage designs, you will learn how to apply the 2 traditional power optimization techniques of clock gating and leakage power recovery, optimizing for dynamic power and leakage power respectively.

    For multi-voltage or multi-supply designs, you will learn how to apply the IEEE 1801 UPF flow that uses a power intent specification which is applied to RTL designs. You will understand how to synthesize RTL designs for the required power intent and power-optimization requirements using top-down vs. hierarchical UPF methodologies. You will also learn how to insert scan chains to the synthesized netlist ensure that the gate level design does not have any multi-voltage violations, before writing out design data for Place and Route.

    Objectives

    At the end of this workshop the student should be able to:

    • Apply clock gating to a design at the RTL and gate level
    • Perform multi-stage, hierarchical, and power driven clock gating
    • Perform leakage optimization using multi Vt libraries
    • Restrict the usage of leaky cells
    • Specify power intent using UPF
    • Demonstrate flexible isolation strategy in UPF 2.0
    • Check for UPF readiness of library, reporting PG pins
    • State the purpose of SCMR attribute in library
    • Recognize tradeoff when using dual vs. single rail special cells
    • Correctly specify PVT requirements
    • State how the 6 special cells are synthesized
    • Describe supply net aware Always on Synthesis
    • Apply 2 key debugging commands in a UPF flow
    • Control voltage, power domain mixing when inserting scan chains
    • Allow/prevent the reuse of level shifters and isolation cells between scan and functional paths
    • Minimize toggle in functional logic during scan shifting
    • Validate SCANDEF information for place and route

    Course Outline

    • Clock Gating
    • Leakage Power Optimization
    • Power Intent using IEEE 1801 UPF
    • Library Requirements
    • Synthesis with UPF
    • Power Aware DFT



    第三階段 DFT Compiler

    Overview
    In this workshop you will learn to use DFT Compiler to perform RTL and gate-level DFT rule checks, fix DFT DRC rule violations, and to insert scan using top-down and bottom-up flows. The workshop explores essential techniques to support large, multi-million gate SOC designs including the bottom-up scan insertion flow in the logical (Design Compiler) domain. Techniques learned include: performing scan insertion in a top-down flow; meeting scan requirements for number of scan chains, maximum chain length and reusing functional pins for scan testing, inserting an On-Chip Clocking (OCC) controller for At-Speed testing using internal clocks; and using Adaptive Scan (DFTMAX) to insert additional DFT hardware to reduce the test time and the test data volume required for a given fault coverage.

    Objectives
    At the end of this workshop the student should be able to:
    • Create a test protocol for a design and customize the initialization sequence, if needed, to prepare for DFT DRC checks
    • Perform DFT DRC checks at the RTL, pre-DFT, and post-DFT stages
    • Recognize common design constructs that cause typical DFT violations
    • Automatically correct certain DFT violations at the gate level using AutoFix
    • Implement top-down scan insertion flow achieving well-balanced scan chains
    • Write a script to perform all the steps in the DFT flow, including exporting all the required files for ATPG and Place & Route
    • Develop a bottom-up scan insertion script for full gate-level designs to use Test Models at the top-level to improve capacity and runtime
    • Insert an On-Chip Clocking (OCC) controller to use for At-Speed testing with internal clocks
    • Modify a scan insertion script to include DFT-MAX Adaptive Scan compression

    Course Outline

    Unit 1
    • Introduction to Scan Testing
    • DFT Compiler Flows and Setup
    • Test Protocol
    • DFT Design Rule Checks

    Unit 2
    • DFT DRC GUI Debug
    • DRC Fixing
    • Top-Down Scan Insertion
    • Exporting Files

    Unit 3
    • High Capacity DFT Flows
    • On-Chip Clocking (OCC)
    • Multi-Mode DFT
    • DFT MAX

     
    版權所有:曙海信息網絡科技有限公司 copyright 2000-2016
     
    上?偛颗嘤柣

    地址:上海市云屏路1399號26#新城金郡商務樓310。
    (地鐵11號線白銀路站2號出口旁,云屏路和白銀路交叉口)
    郵編:201821
    熱線:021-51875830 32300767
    傳真:021-32300767
    業務手機:15921673576/13918613812
    E-mail:officeoffice@126.com
    客服QQ: 849322415
    北京培訓基地

    地址:北京市昌平區沙河南街11號312室
    (地鐵昌平線沙河站B出口) 郵編:102200 行走路線:請點擊這查看!
    熱線:010-51292078
    傳真:010-51292078
    業務手機:15701686205
    客服QQ:1243285887
    成都培訓基地

    地址:四川省成都市高新區中和大道一段99號領館區1號1-3-2903 郵編:610031
    熱線:4008699035 業務手機:13540421960
    客服QQ:1325341129
    南京培訓基地

    地址:江蘇省南京市棲霞區和燕路251號金港大廈B座2201室
    (地鐵一號線邁皋橋站1號出口旁,近南京火車站)
    熱線:4008699035
    傳真:4008699035
    郵編:210046
    客服QQ:1325341129
     
    深圳培訓基地

    地址:深圳市環觀中路28號82#201室

    熱線:4008699035
    傳真:4008699035
    業務手機:13699831341

    郵編:518001
    客服QQ:2472106501
    武漢培訓基地

    地址:湖北省武漢市東湖高新技術開發區高新二路128號 佳源大廈一期A4-1-701 郵編:430022
    熱線:4008699035
    客服QQ:849322415
    廣州培訓基地

    地址:廣州市越秀區環市東路486號廣糧大廈1202室

    熱線:4008699035
    傳真:4008699035

    郵編:510075
    石家莊培訓基地

    地址:石家莊市高新區中山東路618號瑞景大廈1#802

    熱線:4008699035
    業務手機:13933071028
    傳真:4008699035
    郵編:050200
     
    沈陽培訓基地

    地址:遼寧省沈陽市東陵渾南新區沈營路六宅臻品29-11-9 郵編:110179
    熱線:4008699035
    鄭州培訓基地

    地址:鄭州市高新區雪松路錦華大廈401

    熱線:4008699035

    郵編:450001
    西安培訓基地

    地址:西安市雁塔區高新二路12號協同大廈901室

    熱線:029-86699670
    業務手機:18392016509
    傳真:029-86699670
    郵編:710054
     

    雙休日、節假日及晚上可致電值班電話:021-51875830 值班手機:15921673576/13918613812


    備案號:滬ICP備08026168號

    .(2014年7月11)..................................................................................................
    友情鏈接:Cadence培訓 ICEPAK培訓 EMC培訓 電磁兼容培訓 sas容培訓 羅克韋爾PLC培訓 歐姆龍PLC培訓 PLC培訓 三菱PLC培訓 西門子PLC培訓 dcs培訓 橫河dcs培訓 艾默生培訓 robot CAD培訓 eplan培訓 dcs培訓 電路板設計培訓 浙大dcs培訓 PCB設計培訓 adams培訓 fluent培訓系列課程 培訓機構課程短期培訓系列課程培訓機構 長期課程列表實踐課程高級課程學校培訓機構周末班培訓 南京 短期培訓系列課程培訓機構 長期課程列表實踐課程高級課程學校培訓機構周末班 曙海 教育 企業 培訓課程 系列班 長期課程列表實踐課程高級課程學校培訓機構周末班 短期培訓系列課程培訓機構 曙海教育企業培訓課程 系列班
    在線客服
    熟女AV之人妻熟女